 | |||||||
| |||||||
| 78 RPM | PS-1200 External Power Supply |
RC-1200 Threaded Record Clamp |
|||
 |
Only $175.00  |
 |
Only $249.95 120V AC 220V AC DJ Runs 2 Decks At The Same Time Only $279.95 120V AC 220V AC |
 |
Only $149.95 |
SPEEDS: 33/45/78 RPM 78 RANGE:72 - 84 RPMAdd 78 RPM to your '1200 and discover the beginnings of recorded sound. Turntable must be returned to KAB for this modification. Normal turnaround time is 7-10 days. Read More... |
OUTPUT 34VDC Regulated IEC Power Cord: YESAdding the PS-1200 to your 1200 removes all sources of AC voltage from within the turntable. It eliminates a source of vibration and EMI radiation. Improves performance of internal power regulation as well. Listeners report quieter backgrounds and even more stable imaging. Only 2 internal solder connection required to install. Read More... |
#8 Threaded Shaft Clamp Diameter: 3 InchesThis very light weight clamp applies controlled pressure to hold the record against the platter mat. Clamp will not mar record labels. Simple installation. Read More... |
|||
| TOP | |||||
| SX-1200 Strobe Disabler |
TD-1200 Tonearm Fluid Damper |
FOOTERS | |||
 Only $49.95 |
 |
Only $149.95 Black Silver Extra Silicone Syringe $7.95 |
 Sonic Domes  Isonoe Footers  Sorbothane Boots (Shown in place. Isonoe footers not included) |
Sonic Domes $29.95 Isonoe Footers $175.00 Isonoe Sorbothane Boot $54.95 |
|
TOGGLE RATE: Approx 5 seconds.Easily extinguish the brite strobe lamp by holding the start stop button for 5 seconds. Hold another 5 seconds and lamp turns back on again. Eliminates a major source of noise interference on power supply. Easy to install. Read More... |
Material: Machined Alumninum Silicone: Dow Corning 200 Viscosity: 60,000 CSTThe best arms feature fluid damping Fluid damping improves the low frequency performance of the tonearm by suppressing shock induced resonance. improves isolation to feedback and improves detail by suppressing bearing chatter. Very easy to install. Read More... |
KAB Sonic Domes SD50 Isonoe Silicone Spring Isolator Isonoe Sorbothane BootsFooters will improve performance by increasing isolation from platform vibration. The Isonoe System is a sophisticated silicone spring design that retains the ability to easily level the turntable. All are paks of 4. Sonic Domes Read More... Isonoe System Read More... |
|||
| TOP | |||||
| Stock Tonearms | Bottom Plates | Counterweights | |||
   |
M5G $103.95 MK2-5 Black $52.95 MK2-5 Silver $52.95 Tonearm Rest $4.95 |
    Click Here To See Installed View |
Cardas DIN $69.95 Turret Terminal $39.95 Turret Terminal Board Only $4.95 RCA Jack Plate $29.95 |
  |
Main $17.95 Aux $4.95 |
Stock ArmsKAB stocks the 3 stock tonearms. All arms are interchangeable. The M5G arm differs in two ways. the wand is finshed in satin titanium and features OFC copper wiring. This arm sounds more detailed in the upper harmonics. Which is what you would expect going from tin plated strands to OFC. |
Bottom Plates: Cardas 5 Pin DIN 5 Terminal Solder Turret RCA Jack PlateWant to rewire your own arm? Here are a few items to make it easier. A bottom plate with 5 pin DIN or 5 terminal solder terminations. We use the turret terminal inside as well to replace the original PCB. The RCA Jack plate terminates in hi quality RCA's and a ground post. Read More... |
Main: Calibrated AUX: Screws onto backThe Main counterweight is the original part. the Aux weight(not shown) is required when working with cartridges weighing more than 9 grams |
|||
| TOP | |||||
| Head Shells | Wire Sets | Hardware | |||
   |
Mk2-5 $22.00 M5G $28.00 LTD $29.00 |
   |
Stock Wire Set $3.95 Cardas Wire Set Read This First $38.00 MK2-5 Main Phono Cable $15.95 M5G Main Phono Cable $19.95 |
   How Do I Use This Properly? |
3 gram spacer weight $1.50 Original Hardware $6.50 Overhang Tool $1.50 |
Head ShellsKAB stocks the 2 main headshells and has a small stock on the unique LTD headshell. The M5G headshell features a removeable 4 gram weight and is silver. The LTD headshell is black with Technics printed in gold, The wire terminals are gold plated , crimped and soldered. A nice touch. |
Wire SetsThere are two replacement wire sets available. The stock ones with tin plated terminals and the LTD set with gold plated, and soldered terminals. The M5G main cable is superior. Much more flexible, more strands, thicker center conductor insulator and the end connectors are gold plated, crimped and soldered. |
HardwareThe shim weight is used to add weight and height to the cartridge. The Stock original hardware includes 2 pairs of screws and 2 nuts that fit perfectly in the running slots of the headshell. The Overhang guage is used to align the phono cartridge. When used correctly, this is very fast and accurate. |
|||
| TOP | |||||
| Dust Cover | Patter Parts | Hardware | |||
 Hinge Kit  NoHinge Kit |
Dust Cover $37.00 Hinge Kit $22.95
Front side bumpers $2.50 No Hinge Kit (Rear Bumper Pair) $4.95 |
 |
Spindle Assembly $29.95 Platter Mats Super 1/4" $20.00 Thin 1/8" $15.00 Technics Slip Mats $10.00/pr |
   |
45 adpater $12.95 SFW 010 Spindle Oil $4.50 Incandescent Target Lamp $6.95 Owners Manuals SL200 MK2 $5.00 SL200 MK5 $5.00 SL200 M5G $5.00 |
Dust CoversThe main dustcover does not include the hing kit. Order that separetely . Hinge kits are easy to install on MK3, and 5 models. No dissasembly required. See Installation Pix Here. The NoHinge kit is a large rubber bumper that replaces the hinge and makes the cover a slip on, slip off affair. Hinge History. The original MK2 hinge has adjustable height. In the MK3 & 5, Technics engineers got smart and place a pair of pilot holes in just the right spot. So a full dissassembly is not required. KAB provides a pair of drill tip self tapping screws that drive right into the pilot holes. If someone took the hinge caps off of your MK2, you will need different screws. consult with us. |
Platter PartsAlways remember to lube the spindle every 2000 hours of use. If you should damage the spindle, replace the entire assembly. Usually the super thick mat is the one to have because it gives sufficient height to set VTA on a variety of cartridges. It also weighs 17 oz which helps top side damping of the platter. They look just like the mat in the picture with the spindle above. No logos on top. The bottom is all flat with an inset part number. The mat can be used on either side for LP's. It does sound different on each side. The slip mats have the Technics logo. Not for audiophile use. |
HardwareThe shim weight is used to add weight and height to the cartridge. The Stock original hardware includes 2 pairs of screws and 2 nuts that fit perfectly in the running slots of the headshell. The Overhang guage is used to align the phono cartridge. When used correctly, this is very fast and accurate. |
|||
| TOP | |||||
| Solid Hardwood Bases. Your 1200 simply drops into place. No obstructions, No modifications. Hand rubbed lacquer finish. Give your 1200 a more traditional look with one of our wood bases. Note: These are a natural product so the depth of color of the one you receive will vary from the photographs shown. |
  |
| $225.00 ea. Walnut: Cherry: Maple: |
| TOP |